Compare Versions


Bill PDF |Add To My Favorites | print page

AB-2633 Recycling: plastic material. (2013-2014)



Current Version: 03/28/14 - Amended Assembly

Compare Versions information image


AB2633:v98#DOCUMENT

Amended  IN  Assembly  March 28, 2014

CALIFORNIA LEGISLATURE— 2013–2014 REGULAR SESSION

Assembly Bill
No. 2633

Introduced by Assembly Member Allen

February 21, 2014

An act to amend Section 41780.01 of, and to add Section 41780.03 to, the Public Resources Code, relating to solid waste.


LEGISLATIVE COUNSEL'S DIGEST


AB 2633, as amended, Allen. Recycling: plastic material.
Existing law requires the Department of Resources Recycling and Recovery to administer state programs to recycle solid waste, plastic trash bags, plastic packaging containers, waste tires, newsprint, and other specified materials.
The existing California Integrated Waste Management Act of 1989 requires each city, county, city and county, and regional agency, if any, to develop a source reduction and recycling element of an integrated waste management plan containing specified components. On and after January 1, 2000, the element is required to divert 50% of the solid waste subject to the element, except as specified, through source reduction, recycling, and composting activities. The act also declares that it is the policy goal of the state that not less than 75% of solid waste generated be source reduced, recycled, or composted by the year 2020, and annually thereafter.
This bill would restate the policy goal of the state to provide that not less than 75% of solid waste generated be source reduced, recycled, anaerobically digested, used for electricity generation, or composted by the year 2020, and annually thereafter. The bill would also require the department to investigate emerging technologies that convert used plastic products into new plastic feedstock, adopt regulations and protocols by January 1, 2016, that encourage waste-to-energy and waste-to-fuel pyrolysis projects that address the various grades of plastic products that are in landfills, and, beginning January 1, 2016, and each year thereafter, examine and report to the Legislature on possible incentives for businesses and organizations that practice state-of-the-art, cost-effective material separation and recovery techniques to locate recycling centers in California.

This bill would declare the intent of the Legislature to enact legislation that would utilize the technology available to cost-effectively address management of solid waste and maximize the value recovered from reusable plastic material by, among other things, investigating emerging technologies that convert used plastic products into new plastic feedstock, such as propylene monomer.

Vote: MAJORITY   Appropriation: NO   Fiscal Committee: NOYES   Local Program: NO  

The people of the State of California do enact as follows:


SECTION 1.

 The Legislature finds and declares all of the following:
(a) California’s goal of diverting not less than 75 percent of solid waste, including plastic products, from landfills does not take into account that landfills will continue to be the only disposal alternative for many plastic products.
(b) Existing law and current policies do not recognize new technologies that are available to maximize the reusable lifespan of plastic products and that are integral to meeting the state’s diversion goals. The new technologies and policies could address several obstacles the state currently faces with regard to plastic products, including the multicomponent construction in plastic products, as in plastic containers with integral caps and valves, usage history of plastic products, such as nonhazardous used hospital coverings, contamination levels of the plastic products, such as food service wastes and plastic products used for floor cleaning, and the diversity of plastic grades, or types of plastic, within each plastic material class.
(c) According to the federal Environmental Protection Agency, in 2011, 13.1 million tons of textiles ended up in landfills, an increase of 44 percent from 1999, while only 2 million tons were diverted from landfills. The low diversion percentage is largely due to the multicomponent nature of many textiles that are in the landfills. Further, 60 percent of textiles that end up in landfills are PET polyester, the same material of which plastic beverage containers are made.

SEC. 2.

 Section 41780.01 of the Public Resources Code is amended to read:

41780.01.
 (a) The Legislature hereby declares that it is the policy goal of the state that not less than 75 percent of solid waste generated be source reduced, recycled, anaerobically digested, used for electricity generation, or composted by the year 2020, and annually thereafter.
(b) Notwithstanding subdivision (a), the department shall not establish or enforce a diversion rate on a city or county that is greater than the 50 percent diversion rate established pursuant to Section 41780.

SEC. 3.

 Section 41780.03 is added to the Public Resources Code, to read:

41780.03.
 The department shall do all of the following:
(a) Investigate emerging technologies that convert used plastic products into new plastic feedstock, such as propylene monomer.
(b) Adopt regulations and protocols by January 1, 2016, that encourage waste-to-energy and waste-to-fuel pyrolysis projects that address the various grades of plastic products that are in landfills.
(c) By January 1, 2016, and each January 1 thereafter, examine and report to the Legislature on possible incentives for businesses and organizations that practice state-of-the-art, cost-effective material separation and recovery techniques to locate recycling centers in California.
(d) (1) The requirement for submitting a report to the Legislature under subdivision (c) is inoperative on January 1, 2020, pursuant to Section 10231.5 of the Government Code.
(2) A report to be submitted pursuant to subdivision (c) shall be submitted in compliance with Section 9795 of the Government Code.

SEC. 2.

It is the intent of the Legislature to enact legislation that would utilize technology available to cost-effectively address the management of solid waste and maximize the value recovered from reusable plastic products by doing the following:

(a)Provide incentives to businesses and organizations that practice state-of-the-art, cost-effective material separation and recovery techniques to locate recycling centers in California.

(b)Investigate emerging technologies that convert used plastic products into new plastic feedstock, such as propylene monomer.

(c)Encourage waste-to-energy and waste-to-fuel pyrolysis projects that address the various grades of plastic products that are in landfills.

(d)Complement the state and international trend towards biodegradation by encouraging the use of anaerobic digesters and landfills as available venues for anaerobic biodegradation of plastic products that are embedded with new biodegradable technology. This usage of anaerobic digesters and landfills will result in the release of additional biogas that can be captured and used as renewable energy.