Code Section

Health and Safety Code - HSC

DIVISION 104. ENVIRONMENTAL HEALTH [106500 - 119406]

  ( Division 104 added by Stats. 1995, Ch. 415, Sec. 6. )
  

PART 10. RECREATIONAL SAFETY [115725 - 116095]

  ( Part 10 added by Stats. 1995, Ch. 415, Sec. 6. )
  

CHAPTER 5. Safe Recreational Water Use [115825 - 116090]

  ( Chapter 5 added by Stats. 1995, Ch. 415, Sec. 6. )
  

ARTICLE 2.5. The Swimming Pool Safety Act [115920 - 115929]
  ( Article 2.5 added by Stats. 1996, Ch. 925, Sec. 3.5. )

  
115922.  

(a) Except as provided in Section 115925, when a building permit is issued for the construction of a new swimming pool or spa or the remodeling of an existing swimming pool or spa at a private single-family home, the respective swimming pool or spa shall be equipped with at least two of the following seven drowning prevention safety features:

(1) An enclosure that meets the requirements of Section 115923 and isolates the swimming pool or spa from the private single-family home.

(2) Removable mesh fencing that meets American Society for Testing and Materials (ASTM) Specifications F2286 standards in conjunction with a gate that is self-closing and self-latching and can accommodate a key lockable device.

(3) An approved safety pool cover, as defined in subdivision (d) of Section 115921.

(4) Exit alarms on the private single-family home’s doors that provide direct access to the swimming pool or spa. The exit alarm may cause either an alarm noise or a verbal warning, such as a repeating notification that “the door to the pool is open.”

(5) A self-closing, self-latching device with a release mechanism placed no lower than 54 inches above the floor on the private single-family home’s doors providing direct access to the swimming pool or spa.

(6) An alarm that, when placed in a swimming pool or spa, will sound upon detection of accidental or unauthorized entrance into the water. The alarm shall meet and be independently certified to the ASTM Standard F2208 “Standard Safety Specification for Residential Pool Alarms,” which includes surface motion, pressure, sonar, laser, and infrared type alarms. A swimming protection alarm feature designed for individual use, including an alarm attached to a child that sounds when the child exceeds a certain distance or becomes submerged in water, is not a qualifying drowning prevention safety feature.

(7) Other means of protection, if the degree of protection afforded is equal to or greater than that afforded by any of the features set forth above and has been independently verified by an approved testing laboratory as meeting standards for those features established by the ASTM or the American Society of Mechanical Engineers (ASME).

(b) Before the issuance of a final approval for the completion of permitted construction or remodeling work, the local building code official shall inspect the drowning safety prevention features required by this section and, if no violations are found, shall give final approval.

(Amended by Stats. 2017, Ch. 670, Sec. 4. (SB 442) Effective January 1, 2018.)