26100.
(a) Except as otherwise provided by law, cannabis or cannabis products shall not be sold pursuant to a license provided for under this division unless a representative sample of the cannabis or cannabis products has been tested by a licensed testing laboratory.(b) The department shall develop criteria to determine which batches shall be tested. All testing of the samples shall be performed on the final form in which the cannabis or cannabis product will be consumed or used.
(c) Testing of batches to meet the requirements of this division shall only be conducted by a licensed testing laboratory.
(d) For each batch tested, the testing laboratory shall issue a certificate of analysis for selected lots at a frequency determined by the department with supporting data, to report both of the following:
(1) Whether the chemical profile of the sample conforms to the labeled content of compounds, including, but not limited to, all of the following, unless limited through regulation by the department:
(A) Tetrahydrocannabinol (THC).
(B) Tetrahydrocannabinolic Acid (THCA).
(C) Cannabidiol (CBD).
(D) Cannabidiolic Acid (CBDA).
(E) The terpenes required by the department in regulation.
(F) Cannabigerol (CBG).
(G) Cannabigerolic Acid (CBGA).
(G) (H) Cannabinol (CBN).
(H) (I) Other compounds or contaminants required by the department.
(2) That the presence of contaminants does not exceed the levels established by the department. In establishing the levels, the department shall consider the American Herbal Pharmacopoeia monograph, guidelines set by the Department of Pesticide Regulation pursuant to subdivision (c) of Section 26060, and any other relevant sources. For purposes of this paragraph, “contaminants” includes, but is not limited to, all of the following:
(A) Residual solvent or processing chemicals.
(B) Foreign material, including, but not limited to, hair, insects, or similar or related adulterant.
(C) Microbiological impurities as identified by the department in regulation.
(D) Heavy metals, including, but not limited to, lead, cadmium, arsenic, and mercury.
(3) For edible cannabis products, that the milligrams per serving of THC does not exceed 10 milligrams per serving, plus or minus 12 percent. After January 1, 2022, the milligrams of THC per serving shall not deviate from 10 milligrams by more than 10 percent.
(4) Notwithstanding paragraph (3), the department shall establish regulations to adjust testing variances for edible cannabis products that include less than five milligrams of THC in total.
(e) A testing laboratory may amend a certificate of analysis to correct minor errors, as defined by the department.
(f) (1) Standards for residual levels of volatile organic compounds shall be established by the department.
(2) On (A) or before January 1, 2023, the The department shall establish a standard cannabinoids test method, including standardized operating procedures, that shall be utilized as the quality reference standard by all testing laboratories. The department may establish more than one method for use by testing laboratories and these standards may be developed through a reference laboratory.
(B) A testing laboratory may deviate from the standard test method if they can demonstrate outcomes consistent with those established under this section.
(g) The testing laboratory shall conduct all testing required by this section in a manner consistent with general requirements for the competence of testing and calibrations activities, including sampling and using verified methods.
(h) All testing laboratories performing tests pursuant to this section shall obtain and maintain ISO/IEC 17025 accreditation as required by the department in regulation.
(i) (1) If a test result falls outside the specifications authorized by law or regulation, the testing laboratory shall follow a standard operating procedure to confirm or refute the original result.
(2) If a test result falls outside the specifications authorized by law or regulation, the testing laboratory may retest the sample if both of the following occur:
(A) The testing laboratory notifies the department, in writing, that the test was compromised due to equipment malfunction, staff error, or other circumstances allowed by the department.
(B) The department authorizes the testing laboratory to retest the sample.
(j) A testing laboratory shall destroy the remains of the sample of cannabis or cannabis product upon completion of the analysis, after the required retention time, as determined by the department through regulations.
(k) A testing laboratory shall be subject to in-person audits by the department at least once every two years. On or before July 1, 2026, the department shall establish standard operating procedures for conducting audits, including frequency, manner, and notification requirements. The results of the audit, including any record of violation, shall be made available on the department’s internet website.
(k) ( l) Presale inspection, testing transfer, or transportation of cannabis or cannabis products pursuant to this section shall conform to a specified chain of custody protocol and any other requirements imposed under this division.
( (m) l
) This division does not prohibit a licensee from performing testing on the licensee’s premises for the purposes of quality control of the product in conjunction with reasonable business operations. This division also does not prohibit a licensee from performing testing on the licensee’s premises of cannabis or cannabis products obtained from another licensee. Onsite testing by the licensee shall not be certified by the department and does not exempt the licensee from the requirements of compliance testing at a testing laboratory pursuant to this section.