Today's Law As Amended


Add To My Favorites | print page

AB-1249 Waste tire facility permit.(2005-2006)



As Amends the Law Today


SECTION 1.

 Section 42807 of the Public Resources Code is amended to read:

42807.
 “Waste tire” means a tire that is no longer mounted on a vehicle and is no longer suitable for use as a vehicle tire due to wear, damage, or deviation from the manufacturer’s original specifications. A waste tire includes a repairable tire, scrap tire, altered waste tire, and a used tire that is not organized for inspection and resale by size in a rack or a stack in accordance with Section 42806.5, but does not include a tire derived product or crumb rubber.

SEC. 2.

 Section 42820 of the Public Resources Code is amended to read:

42820.
 (a) The board, in consultation with the Office of Environmental Health Hazard Assessment, shall adopt regulations setting forth the procedures and requirements necessary to obtain a major waste tire facility permit. The regulations adopted pursuant to this subdivision shall not be limited to, but shall include by reference, the regulations adopted by the State Fire Marshal pursuant to subdivision (b).
(b) The State Fire Marshal, in consultation with the board, shall adopt fire prevention regulations for a major waste tire facility.
(c) Regulations adopted pursuant to subdivision (a) shall not require the issuance of a separate permit to a solid waste disposal facility that is permitted pursuant to Chapter 3 (commencing with Section 44001) of Part 4.

SEC. 3.

 Section 42821 of the Public Resources Code is amended to read:

42821.
 The regulations for a major waste tire facility permit shall include, but not be limited to, all of the following:
(a) Requirements for submission of a detailed operations plan that contains the following components:
(1) Fire prevention measures consistent with applicable regulations adopted by the State Fire Marshal pursuant to subdivision (b) of Section 42820.
(2) Fencing and other security measures.
(3) Vector control measures.
(4) Limits on the size and height of tire piles.
(5) A closure plan.
(b) Requirements for submission of a detailed plan and implementation schedule for the elimination or substantial reduction of existing tire piles using any of the following methods or techniques:
(1) Polymer treatment.
(2) Rubber reclaiming and crumb rubber production.
(3) Pyrolysis.
(4) Production of supplemental fuels for cement kilns, lumber operations, or other industrial processes.
(5) Tire shredding and transportation to an authorized solid waste landfill.  
(6) Energy recovery through incineration of whole or shredded tires in accordance with the terms and conditions of a permit issued by an air pollution control district or air quality management district.
(7) Other applications determined to be appropriate by the board.
(c) Requirements for the submission of evidence of financial assurances secured by the operator of the facility that are adequate to cover damage claims arising out of the operation of the facility and that are adequate to cover the cost of closure if that becomes necessary. The financial assurance shall be a trust fund, surety bond, letter of credit, insurance, or other equivalent financial arrangement acceptable to the board.